Required Tool - BRP Cam-am Outlander 6x6 DPS 2015 Manual

tmr2011-045-011_a
TYPICAL
1. Cylinder head base
2. Marks on timing gear of the opposite cylinder
Camshaft Timing Piston No. 2 (rear)
1. Remove spark plugs of both cylinders.
2. Remove valve covers of both cylinders.
3. Remove the screw plug and O-ring from mag-
neto cover.
vmr2015-033-005_a
1. Screw plug
2. O-ring
4. Remove the crankshaft position sensor (CPS).
vmr2015-152
Section 02 ENGINE, CVT AND GEARBOX
Subsection 11 (TIMING CHAIN (650))
vmr2015-033-006_a
1. CPS
2. Screw
5. Set rear piston no. 2 to TDC ignition by turning
the crankshaft clockwise.
vmr2015-033-007_a
TURN CRANKSHAFT CLOCKWISE TO PISTON NO. 2 TDC
1. Allen key 14 mm
5.1 The rear piston is at TDC when it's index
mark on the magneto flywheel is aligned
with the notch in the magneto cover.

REQUIRED TOOL

Allen key 14 mm
207