BRP Cam-am Outlander 6x6 DPS 2015 Manual page 40

Section 01 MAINTENANCE
Subsection 03 (PERIODIC MAINTENANCE PROCEDURES (650))
sfvmr2014-010-005
MIDDLE DRIVE, LH SIDE OF VEHICLE
1. Drain plug
sfvmr2014-010-006
REAR FINAL DRIVE, RH SIDE OF VEHICLE
1. Drain plug
6. Install drain plug.
DRAIN PLUG
Tightening torque
7. Refill the middle or rear final drive.
30
7.5 N•m ± 0.5 N•m
(66 lbf•in ± 4 lbf•in)
RECOMMENDED OIL
XPS SYNTHETIC
GEAR OIL (75W 140)
Middle
(P/N 293 600 140)
Drive
or a 75W 140
(API GL-5) gear oil
XPS SYNTHETIC
Rear
GEAR OIL (75W 140)
Final (P/N 293 600 140)
Drive or a 75W 140
(API GL-5) gear oil
8. Reinstall filler plug with a NEW sealing ring.
FILLER PLUG
Gasket
Tightening torque
Drive Shaft Boot and Protector
Inspection
1. Visually inspect each drive shaft boot for grease
leak, cracks or opening.
2. Check if the drive shaft boot protectors are
fixed firmly, not torn or otherwise damaged.
3. Replace if necessary.
Drive Shaft Joint Inspection
Turn and move drive shaft back and forth to detect
excessive play.
Rear Propeller Shaft U-Joint Condition
Check yoke U-joints for wear, backlash or axial
play. Replace if necessary.
Rear Propeller Shaft U-Joint
Lubrication
PROPELLER SHAFT U-JOINT LUBRICATION
Use Hi-temp bearing grease NLGI-2 or an equivalent
WHEELS AND TIRES
Wheel Lug Nut Torque Inspection
Tighten wheel lug nuts to the specified torque us-
ing the illustrated sequence.
WHEEL LUG NUTS
Tightening torque
QUANTITY
400 ml
(14 U.S. oz)
300 ml
(10 U.S. oz)
NEW
22.5 N•m ± 2.5 N•m
(17 lbf•ft ± 2 lbf•ft)
100 N•m ± 10 N•m
(74 lbf•ft ± 7 lbf•ft)
vmr2015-107