Timing Chain Guide - BRP Cam-am Outlander 6x6 DPS 2015 Manual

vmr2006-044-018_a
1. Timing chain
If chain is excessively worn or damaged, replace
it as a set (camshaft timing gear and timing chain).
Check timing chain guides for wear, cracks or de-
formation. Replace as required.
NOTE: Check also the timing chain guide (ten-
sioner side).
Timing Chain Installation
The installation is essentially the reverse of the re-
moval procedure however, pay attention to the fol-
lowing details.
NOTE: Installation is the same for both timing
chains.
Install timing chain with camshaft timing gear.
NOTE: Ensure to carry out proper valve timing, re-
CAMSHAFT TIMING GEARS
fer to
tion.
NOTICE
Improper valve timing will damage
engine components.

TIMING CHAIN GUIDE

(TENSIONER SIDE)
tmr2011-045-019_a
1. Timing chain guide (tensioner side)
2. Bearing screw
Timing Chain Guide Removal
(Tensioner Side)
TIMING CHAIN
Refer to
vmr2015-152
in this subsec-
in this subsection.
Section 02 ENGINE, CVT AND GEARBOX
Subsection 11 (TIMING CHAIN (650))
Timing Chain Guide Inspection
(Tensioner Side)
Check timing chain guide for wear, cracks or de-
formation. Replace if necessary.
Timing Chain Guide Installation
(Tensioner Side)
The installation is the reverse of the removal pro-
cedure.
TIMING CHAIN GUIDE BEARING SCREW
Service product
Tightening torque
LOCTITE 243 (BLUE)
(P/N 293 800 060)
10 N•m ± 1 N•m
(89 lbf•in ± 9 lbf•in)
211