Engine Oil - BRP Can-am MAVERICK Trail T Series Operator's Manual

NOTICE
Maintaining a clean CVT
air filter will maximize air flow for an
optimum CVT components lifespan.

Engine Oil

Engine Oil Level Verification
NOTICE
Operating
with an improper level may severely
damage engine.
NOTICE
Check oil level when en-
gine is cold.
1. Place vehicle on a level surface.
2. Unscrew dipstick then remove it
and wipe clean.
219001880-028_a
1. Engine oil dipstick
3. Reinstall dipstick, screw in it com-
pletely.
4. Remove dipstick and check oil level.
It should be near or equal to the up-
per mark.
the engine
______________
MAINTENANCE PROCEDURES
1. Full
2. Add
To add oil, remove the dipstick. Place a
funnel into the dipstick hole.
Add a small amount of recommended
oil and recheck oil level.
Repeat the above procedures until
oil level reaches the dipstick's upper
mark.
NOTICE
Do not overfill. Wipe off
any spillage.
Properly tighten dipstick.
Recommended Engine Oil
Rotax ® engines were developed and
validated using the XPS™ oil. BRP rec-
ommends the use of its XPS engine oil
or an equivalent at all time. Damages
caused by the use of an oil not suitable
for the engine may not be covered by
the BRP Limited Warranty.
107