BRP Cam-am Outlander 6x6 DPS 2015 Manual page 314

vmr2008-022-014_a
Pull out connector.
vmr2008-022-015_a
Molex Connector Installation
Fully open connector lock.
vmr2008-022-015_b
Install connector to ECM.
vmr2015-132
Section 05 ELECTRICAL SYSTEM
Subsection 02 (WIRING HARNESS AND CONNECTORS)
Rotate connector lock until it snaps locked.
vmr2008-022-013 _b
1. Locked here
Molex Connector Probing
The most recommended and safest method to
probe ECM connector terminals is to use the
ADAPTER TOOL (P/N 529 036 166)
prevent deforming or enlarging terminals which
would lead to bad ECM terminal contact creating
intermittent or permanent problems.
529036166
Disconnect the ECM connector and reconnect on
the tool connector. Probe required terminals di-
rectly in the tool holes.
ECM
. This tool will
423