Replacing The Harness Cfi Connection - ABB OmniCore C30 Product Manual

5.3.6 Replacing the harness CFI connection

Location
The illustration shows the location of the harness CFI connection which is only
available for the CRB 15000 controller.
xx2000002025
Required spare parts
Spare part
Harness CFI connection
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Note
To confirm whether this unit is available in your controller, see chapter
of the controller on page
If this unit is not available in your controller, ignore the related procedure to this
unit when you do any maintenance or repair work.
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
5.3.6 Replacing the harness CFI connection
38.
Article number
3HAC073523-001
Article number
-
-
5 Repair
Overview
Note
Only used for CRB 15000 control-
ler.
Note
Content is defined in section
Standard toolkit for controller on
page 570.
Continues on next page
471