Replacing Parts On The Front Panel; Replacing The Manipulator Signal Connector (Smb) - ABB OmniCore C30 Product Manual

Hide thumbs Also See for OmniCore C30:

Table of Contents

5.3 Replacing parts on the front panel

The illustration shows the location of the manipulator signal connector.

xx1800000037

Required spare parts

Harness Single SMB connection

Harness Double SMB connection

Required tools and equipment

Standard toolkit

ESD protective wrist band

Product manual - OmniCore C30

3HAC060860-001 Revision: P

To confirm whether this unit is available in your controller, see chapter

of the controller on page

If this unit is not available in your controller, ignore the related procedure to this

unit when you do any maintenance or repair work.

The spare part numbers that are listed in the table can be out of date. See the

latest spare parts of the OmniCore C30 via myABB Business Portal,

www.abb.com/myABB.

5.3.1 Replacing the manipulator signal connector (SMB)

Article number

3HAC068537-001

3HAC067490-001

Article number

Harness single SMB

Harness double SMB

Content is defined in section

Standard toolkit for controller on

Continues on next page

Show Quick Links

Table of Contents