ABB OmniCore C30 Product Manual page 65

Installing the vertical mounting kit to the controller
Use this procedure to install the controller in vertical position.
1
2
3
Product manual - OmniCore C30
3HAC060860-001 Revision: P
3.4.3 Mounting the controller with vertical mounting kit [3002-2]
Action
Remove the left side cover screws.
Note
The left side is the side without fans.
Install the side cover unit.
Remove the screws on the back.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
Info/illustration
xx1800000378
xx1800000379
A Side cover unit
B Torx counterink screw M4x10 (6
pcs)
Tightening torque: 1.7-1.8 Nm
xx1800000380
Continues on next page
Continued
A
B
65