ABB OmniCore C30 Product Manual page 554

6 Troubleshooting
6.3.10 Troubleshooting the power supply
Continued
9
10
554
Test
Check the cabling.
The power supply may be faulty,
replace it and verify that the fault
has been fixed.
© Copyright 2019-2022 ABB. All rights reserved.
Note
Make sure that the cabling is correctly connec-
ted and not faulty.
• If the cabling is OK, see
the power unit on page
the fault has been fixed and restart this
guide if necessary.
• If the cabling is found unconnected or
faulty, connect/replace it. Verify that the
fault has been fixed and restart this
guide if necessary.
See Replacing the power supply on page
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Troubleshooting
532. Verify that
365.