Replacing Parts On The Front Panel; Replacing The Manipulator Signal (Smb) And Motors Power Unit Harness Assembly - ABB OmniCore E10 Product Manual

5.3.1 Replacing the manipulator signal (SMB) and motors power unit harness assembly

5.3 Replacing parts on the front panel

5.3.1 Replacing the manipulator signal (SMB) and motors power unit harness
assembly
Location
The illustration shows the location of the manipulator signal (SMB) and motors
power unit harness assembly
xx2100001327
Required spare parts
Spare part
Harness assembly SMB+Motors
power unit
Product manual - OmniCore E10
3HAC079399-001 Revision: C
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore E10 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
Article number Note
3HAC075553-001
5 Repair
Continues on next page
147