ABB OmniCore C30 Product Manual page 492

5 Repair
5.4.1 Replacing the power cable and power cable cover
Continued
Equipment
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore C30,
Circuit diagram - OmniCore C30
for IRB 14050, Circuit dia-
gram - OmniCore C30 for CRB
15000
Removing the power cable and power cable cover
1
2
3
4
Continues on next page
492
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Disconnect the FlexPendant from the
controller.
Remove the attachment screws for the
power cable cover.
Remove the power cable cover.
© Copyright 2019-2022 ABB. All rights reserved.
Article number Note
-
Article number Note
3HAC059896-009,
3HAC063898-009,
3HAC072448-009
Note/Illustration
xx1800001189
xx1800001190
Product manual - OmniCore C30
3HAC060860-001 Revision: P