ABB OmniCore C30 Product Manual page 279

4
5
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Fasten the assembly with the screws.
WARNING
Be careful with the cables installed below
the process plate.
Reconnect all the connectors on as-
sembly of the robot signal exchange
proxy, ethernet extension-seven port
switch (option), ABB ability™ connected
services, scalable I/O digital base (op-
tion), and main computer.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.3.3 Replacing the main computer fan
Note/Illustration
A B
B
xx1800000532
xx1900000215
A Screws, Torx pan head, M4x8 (1 pcs)
B Screws, Torx pan head, M4x8 (4 pcs)
Continues on next page
5 Repair
Continued
B
B
279