Replacing The Fieldbus Master - ABB OmniCore C30 Product Manual

5 Repair

5.2.13 Replacing the fieldbus master

5.2.13 Replacing the fieldbus master
Location
The illustration shows the location of the fieldbus master in the controller.
xx1800003420
Required spare parts
Spare part
DeviceNet Board
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Continues on next page
384
Note
To confirm whether this unit is available in your controller, see chapter
of the controller on page
If this unit is not available in your controller, ignore the related procedure to this
unit when you do any maintenance or repair work.
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
38.
Article number
3HAC043383-001
Article number
-
-
Overview
Note
DSQC1006
Note
Content is defined in section
Standard toolkit for controller on
page 570.
Product manual - OmniCore C30
3HAC060860-001 Revision: P