ABB OmniCore C30 Product Manual page 146

3 Installation and commissioning
3.7.3 Installing the Ethernet extension switch
Continued
Installing the Ethernet extension switch
Removing the Ethernet extension unit slot cover (baseline)
Use this procedure to remove the Ethernet extension unit slot cover.
1
2
3
4
Continues on next page
146
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Press the hooks and remove the Ethernet
extension unit slot cover.
Remove the front panel, top and right
covers of the controller.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx1800000683
xx1800000725
Removing the controller covers on page 222
Product manual - OmniCore C30
3HAC060860-001 Revision: P