ABB OmniCore C30 Product Manual page 83

E
F
G
H
J
K
L
M
N
P
Q
i
ii
Power inlet switch
Use the power inlet switch to turn on and off power to the controller. It also possible
to restart the controller using the FlexPendant.
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Description
Scalable I/O connection
Robot signal exchange proxy, customer inter-
face connection
Ethernet switch connection
Power inlet switch
Power inlet connector
IP20 DeviceNet connector
IP20 power outlet connector
Connected Services Gateway, with Ability
port (option wired) or antenna connector
(options 3G or WiFi)
WAN port
LAN port
Management port
Not available for CRB 15000 controller.
Only available for CRB 15000 controller.
Note
When restarting the controller, wait until the LED PC STAT has turned off before
turning on power again.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.5.1 Connectors on the OmniCore C30 controller
Label
I/O
X14/X15/X19/X20
ETHERNET
SWITCH
Q0
X0
X17
X45
ABB Ability
WAN
LAN
MGMT
Continued
Reference on
the circuit dia-
gram
K5.1
K2-X14, K2-X15,
K2-X19, K2-X20
K4
Q0
X0
X17
X45
TM
K7
A2-X23
A2-X2
A2-X3
Continues on next page
83