ABB OmniCore C30 Product Manual page 62

3 Installation and commissioning
3.4.2 Mounting the controller with 19" rack mounting kit [3002-1]
Continued
Equipment
Standard toolkit
Installing the 19" rack mounting kit to the controller
Use this procedure to install the controller in a 19" cabinet.
1
2
Continues on next page
62
Action
Remove the screws on the front panel and
the five feet from the bottom.
Assemble the front and the back mounting
kit.
© Copyright 2019-2022 ABB. All rights reserved.
Information
See Standard toolkit for controller on
page 570.
Information
xx1700001885
C A D
xx1700001883
A Front mounting kit
B Back mounting kit
C Torx pan head screw M4x12 (4 pcs)
Tightening torque: 1.7-1.8 Nm
D Torx countersunk screw M4x10 (5
pcs)
Tightening torque: 1.7-1.8 Nm
Product manual - OmniCore C30
3HAC060860-001 Revision: P
B