Installing The Fieldbus Master And The Devicenet Harness - ABB OmniCore C30 Product Manual

3.7.5 Installing the fieldbus master and the DeviceNet harness

Location
The illustration shows the location of the fieldbus master in the main computer.
xx1800003420
Harness DeviceNet is an option of process connector.
The illustration shows the location of the harness DeviceNet in the controller.
xx1800000737
Product manual - OmniCore C30
3HAC060860-001 Revision: P
3.7.5 Installing the fieldbus master and the DeviceNet harness
Note
The DeviceNet board and the DeviceNet harness must be installed at the same
time.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
Continues on next page
167