ABB OmniCore C30 Product Manual page 340

5 Repair
5.2.9 Replacing the main computer
Continued
Concluding procedure
1
2
3
Removing the main computer by parts
Preparations
1
2
3
Continues on next page
340
Action
Refit the covers.
Restore the hardware settings.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 212.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Remove the front panel, top and right
covers of the controller.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
Refitting the controller covers on page
Restoring the hardware settings on page
Note/Illustration
Location of wrist strap button:
xx1800000683
Removing the controller covers on page
Product manual - OmniCore C30
3HAC060860-001 Revision: P
227.
356.
222.