ABB OmniCore C30 Product Manual page 400

5 Repair
5.2.13 Replacing the fieldbus master
Continued
Refitting the connected services gateway
1
2
3
Continues on next page
400
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Hook up the connected services gateway
to the bracket and push carefully into
position.
Note
During the installation, the gap between
the lower surface of the connected ser-
vices gateway and the upper surface of
the main computer should be zero.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx2000000532
xx1800000497
TOP VIEW
Product manual - OmniCore C30
3HAC060860-001 Revision: P