Removing the Ethernet extension switch (option)
1
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Disconnect:
•
K2.X2 - K4.X8, A2.X1
•
A2.X4 - K4.X6
Note
When Ethernet extension switch
is selected, connect and discon-
nect the connector A2.X4 to/from
K4.X6.
•
Harness adapter - A2.X4/K4.X7.
Note
When Ethernet extension switch
is selected, connect and discon-
nect the adapter cable (Adapter -
A2.X4/K4.X7) to/from K4.X7.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.5 Replacing the Ethernet switch
Note/Illustration
Continues on next page
5 Repair
Continued
293