ABB OmniCore C30 Product Manual page 185

3
Refitting the robot signal exchange proxy
1
Product manual - OmniCore C30
3HAC060860-001 Revision: P
3.7.5 Installing the fieldbus master and the DeviceNet harness
Action
Hook up the Ethernet extension switch
to the bracket and then push the switch
into position.
Note
During the installation, there should be
no gap between the upper surface of the
Ethernet extension switch and the lower
surface of highest bracket on the main
computer.
xx1800000972
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
Note/Illustration
xx1800000539
xx1800000493
Note/Illustration
Continues on next page
Continued
185