ABB OmniCore C30 Product Manual page 483

2
3
4
5
6
7
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Insert the IP20 power outlet connector
into the front panel from inside the cabin-
et.
Secure it with the screws.
Reconnect the power supply optional.
Insert the cables on IP20 power outlet
connector into the clips in the bottom of
the cabinet.
Tip
Use the same position as from removing
IP20 power outlet connector.
Reconnect:
• X45 - T5.X2.
© Copyright 2019-2022 ABB. All rights reserved.
5.3.7 Replacing the IP20 power outlet connector
Note/Illustration
Location of wrist strap button:
xx1800000683
Screws: Torx, countersunk screw M4x10 (2
pcs)
xx1800000742
xx1900001006
5 Repair
Continued
Continues on next page
483