ABB OmniCore C30 Product Manual page 66

3 Installation and commissioning
3.4.3 Mounting the controller with vertical mounting kit [3002-2]
Continued
4
5
Continues on next page
66
Action
Install the back hanging bracket.
Remove the right side cover screws.
Note
The right side is the side with fans.
© Copyright 2019-2022 ABB. All rights reserved.
Info/illustration
A
B
xx1800000381
A Back hanging bracket
B Torx countersunk screw M4x10 (6
pcs)
Tightening torque: 1.7-1.8 Nm
xx1800001277
Product manual - OmniCore C30
3HAC060860-001 Revision: P