ABB OmniCore C30 Product Manual page 120

3 Installation and commissioning
3.5.8 Descriptions for connectors
Continued
Antenna connector
The Connected Services Gateway unit has either an Ability port or an antenna
connector on the front. See installation procedures in section
on page
xx1800000823
I/O connectors - Scalable I/O (option)
xx1700001063
A
B
The connectors contain 16 digital input signals, 16 digital output signals, 24 V and
0 V for the outputs, and 0 V for the inputs.
Note that the Digital Output requires a 24 V separate power supply.
For connection details, see Circuit diagram - OmniCore C30, Circuit
diagram - OmniCore C30 for IRB 14050, Circuit diagram - OmniCore C30 for CRB
15000, 3HAC059896-009, 3HAC063898-009, 3HAC072448-009 and Application
manual - Scalable I/O, 3HAC070208-001.
Continues on next page
120
57.
A
Scalable I/O output connectors
Scalable I/O input connectors
© Copyright 2019-2022 ABB. All rights reserved.
On-site installation
B
Product manual - OmniCore C30
3HAC060860-001 Revision: P