ABB OmniCore C30 Product Manual page 388

5 Repair
5.2.13 Replacing the fieldbus master
Continued
41 For connected services gateway wired, there is no power cable.
Continues on next page
388
Action
For the Ethernet extension switch (op-
tion):
• K2.X2 - K4.X8, A2.X1
• A2.X4 - K4.X6
Note
When Ethernet extension switch
is selected, connect and discon-
nect the connector A2.X4 to/from
K4.X6.
• Harness adapter - A2.X4/K4.X7.
Note
When Ethernet extension switch
is selected, connect and discon-
nect the adapter cable (Adapter -
A2.X4/K4.X7) to/from K4.X7.
For the connected services gateway:
41
• K7.X1 - K2.X3
• K7.X2 - A2.X5
Note
The connector K7.X2 is locked;
grab the connector, push it in to
release it and then remove the
connector.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
Product manual - OmniCore C30
3HAC060860-001 Revision: P