Complete Robot; Replacing Cable Harness, Lower End (Axes 1-3) - ABB IRB 760 Series Product Manual

4.3 Complete robot

4.3.1 Replacing cable harness, lower end (axes 1-3)

Overview
The cable harness 1-6 is undivided.
How to replace the cable harness is described in two steps - lower end (axes 1-3)
and upper end (axis 6). This procedure describes how to replace the lower end of
the cable harness. How to replace the upper end can be found in section
the cable harness, upper end (incl. axis 6) on page
Product manual - IRB 760
3HAC039838-001 Revision: M
4.3.1 Replacing cable harness, lower end (axes 1-3)
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
Replacing
163.
Continues on next page
153