ABB OmniCore C30 Product Manual page 419

Removing the power supply optional
1
2
3
Removing the motor connector
1
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Disconnect:
• A1.X7 - T5.X1
Remove the attachment screws and lift
the power supply out.
Disconnect:
• T5.X2 - X45
Action
Disconnect the following connectors for
the motor connector:
• T4.X7, T4.X8, T4.X9
• X1 - K2.X7 & X22
• Two ground cables which con-
nects on the left side of the cabin-
et frame.
© Copyright 2019-2022 ABB. All rights reserved.
5.3.2.1 Replacing the motor connector
Note/Illustration
xx1800000549
Note/Illustration
Continues on next page
5 Repair
Continued
419