ABB OmniCore C30 Product Manual page 168

3 Installation and commissioning
3.7.5 Installing the fieldbus master and the DeviceNet harness
Continued
Required spare parts
Spare part
DeviceNet Board
Harness DeviceNet/Harness 24V
ext. cover plate
Harness DeviceNet connection
Connector assembly Single-row
female
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore C30,
Circuit diagram - OmniCore C30
for IRB 14050, Circuit dia-
gram - OmniCore C30 for CRB
15000
Installing the DeviceNet board and the DeviceNet harness
Preparations
1
Continues on next page
168
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
© Copyright 2019-2022 ABB. All rights reserved.
Article number Note
3HAC043383-001 DSQC1006
3HAC063601-001
3HAC062150-001 DSQC1004
3HAC064901-001 Mating CONN for IP20 DeviceNet
connector
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Article number Note
3HAC059896-009,
3HAC063898-009,
3HAC072448-009
Note/Illustration
Product manual - OmniCore C30
570.
3HAC060860-001 Revision: P