ABB OmniCore C30 Product Manual page 463

2
3
4
5
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Insert the process connectors into the
front panel from inside the cabinet.
Secure it with the screws.
Insert the cables on process connectors
into the clips in the bottom of the cabinet.
Tip
Use the same position as from removing
process connectors.
© Copyright 2019-2022 ABB. All rights reserved.
5.3.5 Replacing the process connectors
Note/Illustration
Location of wrist strap button:
xx1800000683
Screws: Torx, countersunk screw M4x10 (2
pcs)
xx1800000739
xx1900001008
Continues on next page
5 Repair
Continued
463