ABB OmniCore C30 Product Manual page 395

2
3
Refitting the fieldbus master
Preparations
1
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Remove the attachment screws and take
the cover off.
Remove the attachment screw on the
fieldbus master and take out the fieldbus
master.
Note
Be careful when you pull it out from the
card slot.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.13 Replacing the fieldbus master
Note/Illustration
xx1800003415
B
xx1800003419
A Card slots
B Guide rail
Note/Illustration
Continues on next page
5 Repair
Continued
A
395