ABB OmniCore C30 Product Manual page 320

5 Repair
5.2.9 Replacing the main computer
Continued
3
Removing the small fan
1
2
3
Removing the axis computer from the cabinet
1
Continues on next page
320
Action
Remove the front panel, top and right
covers of the controller.
Action
Remove the screws holding the fan.
Push and slide the fan bracket and lift it
out.
Disconnect:
• G2.X1-K2.X17
Action
Disconnect:
• K6.X11 - A1.X3
• K6.X2 - A2.X9
• K6.X1 - K2.X3.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
Removing the controller covers on page
Note/Illustration
xx1800000479
xx1800000480
Note/Illustration
Product manual - OmniCore C30
3HAC060860-001 Revision: P
222.