ABB OmniCore C30 Product Manual page 76

3 Installation and commissioning
3.4.6 Mounting the FlexPendant holder
Continued
Mounting the bracket for the emergency stop on the FlexPendant holder
The FlexPendant holder is shipped without the bracket for the emergency stop
assembled to the holder. They are separated as two parts.
xx2100000767
Use this procedure to mount the bracket for the emergency stop to the FlexPendant
holder.
1
2
Continues on next page
76
Action
Remove the four screws.
Separate the rear part from the FlexPend-
ant holder.
© Copyright 2019-2022 ABB. All rights reserved.
Note/illustration
xx2000002356
Product manual - OmniCore C30
3HAC060860-001 Revision: P