ABB OmniCore C30 Product Manual page 296

5 Repair
5.2.5 Replacing the Ethernet switch
Continued
3
4
Continues on next page
296
Action
Hook up the Ethernet extension switch
to the bracket and then push the switch
into position.
Note
During the installation, there should be
no gap between the upper surface of the
Ethernet extension switch and the lower
surface of highest bracket on the main
computer.
xx1800000972
Reconnect:
• K2.X2 - K4.X8, A2.X1
• A2.X4 - K4.X6
Note
When Ethernet extension switch
is selected, connect and discon-
nect the connector A2.X4 to/from
K4.X6.
• (Option) Harness adapter -
A2.X4/K4.X7.
Note
When Ethernet extension switch
is selected, connect and discon-
nect the adapter cable (Adapter -
A2.X4/K4.X7) to/from K4.X7.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
xx1800000492
xx1800000493
Product manual - OmniCore C30
3HAC060860-001 Revision: P