Replacing The Robot Signal Exchange Proxy - ABB OmniCore C30 Product Manual

5 Repair

5.2.4 Replacing the robot signal exchange proxy

5.2.4 Replacing the robot signal exchange proxy
Location
The illustration shows the location of the robot signal exchange proxy in the
controller.
xx1800000028
Required spare parts
Spare part
Signal exchange
Harness Short-circuit connector
Harness 24_PC
Harness dual channel safety
Continues on next page
282
Note
To confirm whether this unit is available in your controller, see chapter
of the controller on page
If this unit is not available in your controller, ignore the related procedure to this
unit when you do any maintenance or repair work.
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
38.
Article number
3HAC064662-001
3HAC065107-001
3HAC064091-001
3HAC059273-001
Overview
Note
DSQC3037
Mating connector for robot signal
exchange proxy.
Harness K2.X2 - K4.X8, A2.X1
Harness K2.X12 - K3.X6, K3.X7
Product manual - OmniCore C30
3HAC060860-001 Revision: P