ABB OmniCore C30 Product Manual page 286

5 Repair
5.2.4 Replacing the robot signal exchange proxy
Continued
2
3
Refitting the robot signal exchange proxy
Refitting the robot signal exchange proxy
1
2
Continues on next page
286
Action
Pull the cable ties out from the locking
holes.
Remove the screws and lift out the robot
signal exchange proxy.
Note
Avoid colliding with the frame of the
controller.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
xx1800000971
xx1800000488
Note/Illustration
Location of wrist strap button:
xx1800000683
Product manual - OmniCore C30
3HAC060860-001 Revision: P