Replacing The Drive Unit - ABB OmniCore C30 Product Manual

5.2.12 Replacing the drive unit

Location
The illustration shows the location of the drive unit in the controller.
xx1800000036
Required spare parts
Spare part
Drive
Drive for IRB14050 controller
Harness DC-BUS
Harness DC-BUS
Harness 24_SYS_DRV
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Note
To confirm whether this unit is available in your controller, see chapter
of the controller on page
If this unit is not available in your controller, ignore the related procedure to this
unit when you do any maintenance or repair work.
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
38.
Article number
3HAC063913-001
3HAC063028-001
3HAC063344-001
3HAC063967-001
3HAC064389-001
5 Repair
5.2.12 Replacing the drive unit
Overview
Note
DSQC3041
DSQC3057
Harness A1.X4 - T4.X5
Only used for IRB 14050 control-
ler.
Harness A1.X5 - T4.X1
Continues on next page
373