ABB OmniCore C30 Product Manual page 500

6 Troubleshooting
6.1 Introduction to troubleshooting
Continued
The robot has recently
been repaired
The robot recently had a
software upgrade
The robot has recently
been moved from one site
to another (an already
working robot)
500
Check:
• all connections to the replaced part
• power supplies
• that the correct part has been fitted
• the last repair documents.
Check:
• software versions
• compatibilities between hardware and software
• options and their configuration
Check:
• connections
• software versions
© Copyright 2019-2022 ABB. All rights reserved.
Product manual - OmniCore C30
3HAC060860-001 Revision: P