ABB OmniCore C30 Product Manual page 473

2
3
4
Refitting the harness CFI connection
Refitting the harness CFI connection
1
2
3
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Remove the attachment screws on the
cover.
Push the CFI connector into the cabinet.
Take the harness CFI connection out
from the upper side.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Insert the harness CFI connection into
the front panel from inner side of the
cabinet.
© Copyright 2019-2022 ABB. All rights reserved.
5.3.6 Replacing the harness CFI connection
Note/Illustration
xx1800000727
Note/Illustration
Continues on next page
5 Repair
Continued
473