ABB OmniCore C30 Product Manual page 402

5 Repair
5.2.13 Replacing the fieldbus master
Continued
3
Refitting the robot signal exchange proxy
1
Continues on next page
402
Action
Hook up the Ethernet extension switch
to the bracket and then push the switch
into position.
Note
During the installation, there should be
no gap between the upper surface of the
Ethernet extension switch and the lower
surface of highest bracket on the main
computer.
xx1800000972
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
xx1800000539
xx1800000493
Note/Illustration
Product manual - OmniCore C30
3HAC060860-001 Revision: P