Replacing Other Parts; Replacing The Motor Connection Box - ABB OmniCore V250XT Type B Product Manual

5 Repair

5.5.1 Replacing the motor connection box

5.5 Replacing other parts

5.5.1 Replacing the motor connection box
Location
The motor connection box location is decided by the customer.
Required spare parts
Spare part
Motor Connection Box
Motor Connection Box
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore
V250XT, rev 04 or later
Removing the motor connection box
1
2
Continues on next page
330
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
Disconnect all connectors from the unit
to be replaced.
© Copyright 2023-2023 ABB. All rights reserved.
Article number Note
3HAC087718-001 3-axis, BRB
3HAC087720-001 6-axis, BRB
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Article number Note
3HAC074000-008
Note/Illustration
Product manual - OmniCore V250XT Type B
426.
3HAC087112-001 Revision: A