ABB OmniCore C30 Product Manual page 363

4
5
Refitting the axis computer to the frame
1
2
3
35 Not available for CRB 15000 controller.
36 Only used for CRB 15000 controller.
37 Not available for CRB 15000 controller.
38 Only used for CRB 15000 controller.
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Reconnect:
• A1.X13 - K2.X10
• A1.X9 - K2.X4
35
• A1.X4 - T4.X5
36
• A1.X4 - X1
• A1.X5 - T4.X1
• A1.X12 - T4.X3
• A1.X1 - Incoming mains (X0)
37
• A1.X6 - T2.X1
38
• A1.X6 - X107
• (Option) A1.X7 - T5.X1
Put the main harness in place and secure
it with the velcro straps.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Reconnect:
• K6.X4, K6.X5 - SMB.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.10 Replacing the power unit
Note/Illustration
Note/Illustration
Location of wrist strap button:
xx1800000683
Continues on next page
5 Repair
Continued
363