Cleaning The Flexpendant - ABB OmniCore C30 Product Manual

4 Maintenance

4.3.2 Cleaning the FlexPendant

4.3.2 Cleaning the FlexPendant
Location
The surfaces to clean are shown in the illustration below.
xx1800000128
A
B
Required equipment
Equipment, etc.
Soft cloth
Water/Mild cleaning agent
Clean the touch screen
This section describes how to clean the touch screen.
1
2
3
4
Cleaning considerations
The section below specifies some special considerations when cleaning the
FlexPendant:
Continues on next page
206
Touch screen
Hard buttons
Action
Lock the screen.
It is safe to clean the FlexPendant
when the Lock screen appears.
Clean the touch screen and hard-
ware buttons using a soft cloth and
water or a mild cleaning agent.
Unlock the screen, by tapping the
buttons.
• Use ESD Protection
• Use cleaning equipment as specified above. Any other cleaning equipment
may shorten the life time of the touch screen.
• Check that all protective covers are fitted to the device before cleaning.
• Make sure that no foreign objects or liquids can penetrate into the device.
© Copyright 2019-2022 ABB. All rights reserved.
A B
Note
ESD protected
Info/Illustration
Product manual - OmniCore C30
3HAC060860-001 Revision: P