ABB OmniCore C30 Product Manual page 414

5 Repair
5.3.1 Replacing the manipulator signal connector (SMB)
Continued
2
3
4
Refitting the axis computer to the frame
1
2
Continues on next page
414
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Insert the manipulator signal connector
into the front panel from inner side of the
cabinet.
Secure it with the attachment screws.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
Screws: Torx, countersunk screw M4x10 (4
pcs)
xx1800000727
Note/Illustration
Location of wrist strap button:
xx1800000683
Product manual - OmniCore C30
3HAC060860-001 Revision: P