ABB OmniCore C30 Product Manual page 78

3 Installation and commissioning
3.4.6 Mounting the FlexPendant holder
Continued
Mounting the FlexPendant holder onto a flat surface (Horizontally)
Use this procedure to mount the FlexPendant holder onto a flat surface, like the
top of the controller or a desktop.
1
2
3
Hanging the FlexPendant holder with the bracket
Use this procedure to hang the FlexPendant holder on any place where can hold
the bracket, like the door of the equipment.
Continues on next page
78
Action
Clean the surface and make sure it is dry.
Remove the protective liner from the
tape.
Press the holder onto the desired place.
Tip
The bracket is included when the FlexPendant is purchased.
© Copyright 2019-2022 ABB. All rights reserved.
Note/illustration
xx2000002352
xx2000002353
Product manual - OmniCore C30
3HAC060860-001 Revision: P