Replacing The Safety Digital Base Device - ABB OmniCore C30 Product Manual

5.2.8 Replacing the safety digital base device

Location
The illustration shows the location of the safety digital base device in the controller.
xx1800000032
Required spare parts
Spare part
DSQC1042 Extended safety
Connectors Safety I/O
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Product manual - OmniCore C30
3HAC060860-001 Revision: P
X1
X4 X2
X3
X45
Q0
X0
X17
Note
To confirm whether this unit is available in your controller, see chapter
of the controller on page
If this unit is not available in your controller, ignore the related procedure to this
unit when you do any maintenance or repair work.
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.8 Replacing the safety digital base device
X14 X15
X20
X19
ETHERNET SWITCH
I/O
ABB Ability™
X18 WAN
38.
Article number
3HAC062908-001
3HAC069538-001
Article number
-
-
5 Repair
LAN MGMT
Overview
Note
DSQC1042
Note
Content is defined in section
Standard toolkit for controller on
page 570.
Continues on next page
313