ABB OmniCore C30 Product Manual page 177

Removing the connected services gateway
1
Removing the main computer
1
Product manual - OmniCore C30
3HAC060860-001 Revision: P
3.7.5 Installing the fieldbus master and the DeviceNet harness
Action
Carefully pull the side of the connected
services gateway and rotate it tightly to
take it out from the bracket.
Action
Remove the screws holding the main
computer.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
Note/Illustration
xx1800000495
TOP VIEW
Note/Illustration
xx1800000540
Continues on next page
Continued
177