ABB OmniCore C30 Product Manual page 159

3.7.4 Installing the power supply optional device and the harness 24 V extension
Installing the harness 24 V extension
1
2
3
Refitting the main computer assembly with process plate to the cabinet
1
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Insert the harness into the front panel
from inside of the cabinet and secure the
screws.
Connect:
• X45 - T5.X2.
Insert the cables into the clips on the
bottom of the cabinet.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
Note/Illustration
Screws: Torx, countersunk screw M4x10 (2
pcs)
xx1800000742
xx1900001006
Note/Illustration
Continues on next page
Continued
159