ABB OmniCore C30 Product Manual page 496

5 Repair
5.4.2 Replacing the joystick protection
Continued
Removing the joystick protection
1
2
3
4
Refitting the joystick protection
1
Continues on next page
496
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Disconnect the FlexPendant from the
controller.
Remove the attachment screws.
Remove the joystick protection.
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
xx1800001198
xx1800001199
Note/Illustration
Product manual - OmniCore C30
3HAC060860-001 Revision: P