ABB OmniCore C30 Product Manual page 367

Removing the power supply baseline
1
2
Refitting the power supply baseline
Refitting the power supply
1
2
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
Disconnect:
• T2.X1 - A1.X6
• T2.X2 - K2.X1
Remove the screws and the power sup-
ply.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.11 Replacing the power supply
Note/Illustration
xx1800000547
Note/Illustration
Location of wrist strap button:
xx1800000683
Continues on next page
5 Repair
Continued
367