ABB OmniCore C30 Product Manual page 142

3 Installation and commissioning
3.7.2 Installing the scalable I/O devices
Continued
Removing the digital slot cover (baseline)
1
2
3
4
Installing the scalable I/O internal base device
1
Continues on next page
142
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Press the hooks and remove the digital
slot cover.
Remove the front panel and top cover of
the controller.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx1800000683
xx1800000723
Removing the controller covers on page
Note/Illustration
Product manual - OmniCore C30
3HAC060860-001 Revision: P
222.